Block Blitz Multi-Pave Cleaning Kit

£42.99 including FREE UK delivery

The complete Multi Pave cleaning kit for garden slabs, tarmac and resin drive and paths. Includes 8 sachets of Multi Pave, a watering can, rose and stirring wand. Everything you need to clean and protect up to 120 sq m of garden surfaces against moss, algae and weed growth.


In stock


The Multi Pave cleaning kit contains everything you need to rejuvenate stained and dirty  paving slabs and tarmac or resin drives. Included in the kit are 8 pouches of Multi Pave, a sturdy 10 litre watering can, medium rose and stirring wand.

Applied twice a year, Multi Pave will maintain a powerful defense against algae, moss and weeds, It’s also biodegradable and children and pet safe.

To apply, simply mix, then water the solution onto the required surfaces and watch the magic work.
(NB. Depending on the condition of the surface to be cleaned, up to 3 applications may be required)

The 8 pouches included will treat up to 120 sqm, or two 60 sqm applications. Additional Multi Pave pouches are available in packs of  2, 4 or 8.

Block Blitz cleaning kits are also available for block paving, artificial grass, gravel and decorative aggregates.

No scrubbing, no jet washing, children and pet safe


Application guidelines

Always apply Block Blitz Multi-Pave to dry tarmac, slabs, decking or resin driveways. Don’t apply if rain is forecast within the next 24 hours.

Standard application

Apply Block Blitz every 5-6 months, at any time of the year.

NB: Before use, it’s advisable to test a small inconspicuous area of the surface to be treated to check for suitability. Block Blitz Multi-Pave cleaner may leave a white residue, but rainfall will gradually wash this away.

  • Step 1: Fill a 10 litre plastic watering can (fitted with a medium plastic rose) with cold water. Empty one sachet into the water and stir the solution until fully dissolved.
  • Step 2: Start applying at the highest point to control excessive run off that could damage grass and plants. Apply evenly to soak the surface area.
  • Step 3: Leave to dry. Rinse out the watering can and any other equipment with cold water.

Surfaces in poor condition

Follow these additional steps for areas with excessive surface algae or weeds / moss between joints.

  • Step 1: Apply first application of Multi-Pave. Leave to work for a minimum of two weeks.
  • Step 2: Spot treat any remaining weed growth with weed killing product.
  • Step 3: Apply second treatment of Multi-Pave 4 weeks after the first. Block Blitz will gradually break up the moss and debris between the joints and slowly disperse over time.

Results: Be patient

Allow rainfall to rinse your block paving and Block Blitz will gradually start to transform your paving. Multi-Pave has a slow, secondary, cleaning effect which helps prevent the regrowth of algae and moss for months afterwards. It will also help clean jointing materials, helping to deter future weed growth. Any newly emerging weeds can be spot treated with a weed killing product. However, the more you use Multi-Pave, the more resistant the joints will become to weed growth.

NB: Multi-Pave will not restore the colour of weathered surfaces.

Safety first

IMPORTANT: When using Multi-Pave cleaner;

  • Always wear suitable gloves, eye protection, clothing and footwear.
  • Keep out of the reach of children
  • Keep children and pets off treated areas until dry
  • Never add water to Multi-Pave. Always add Multi-Pave to water. If you get any powder on your skin, wash off immediately with water.
  • Don’t mix with other cleaning products or acids.
  • Don’t inhale dust or mist.
  • Only use in well ventilated areas.
  • Don’t use in contact with aluminium surfaces

Ingredients: Mineral extracts, Minerals, Plant extracts, Saponified plant oils, Glycerene
Contains: Sodium Metasillicate, Sodium Hydroxide

Warning: May be corrosive to metals. Causes severe skin burns and eye damage. Wash hands thoroughly after handling. Wear skin and eye protection. IF SWALLOWED: Rinse mouth. DO NOT INDUCE VOMITING. IF ON SKIN (or hair):  Rinse cautiously water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Dispose of contents in accordance with local regulations.