Use Multi-Pave Outdoor Cleaner to keep decking, slabs and tarmac drives free from slippy moss, algea and weeds. Simply mix, apply and leave, no jet washing or scrubbing required.
Block Blitz Multi-Pave outdoor cleaner is a low cost, efficient and environmentally friendly way to clean and protect decking, slabs and tarmac or resin driveways.
One pouch of Multi-Pave will treat an area of 15 sqm. Simply mix with water, apply with a watering can and leave.
Used twice a year, Multi-Pave will deter up to 90% weed growth and 99% moss growth. Multi-Pave also breaks down organic debris, removing the environment in which weeds thrive.
Featuring a unique blend of mineral and plant extracts, Multi-Pave is biodegradable and environmentally friendly. It’s also child and pet safe, making it ideal for home use.
Great value for Block Blitz beginners, the Multi-Pave Starter Kit include 8 pouches of Block Blitz Multi-Pave, a watering can, rose and stirring wand for just £39.99. Click here for details!
Instructions
Application guidelines
Always apply Multi-Pave Outdoor Cleaner to dry tarmac, slabs, decking or resin driveways. Don’t apply if rain is forecast within the next 24 hours.
Standard application
Apply Multi-Pave every 5-6 months, at any time of the year.
NB: Before use, it’s advisable to test a small inconspicuous area of the surface to be treated to check for suitability. Block Blitz Multi-Pave may leave a white residue, but rainfall will gradually wash this away.
Step 1: Fill a 10 litre plastic watering can (fitted with a medium plastic rose) with cold water. Empty one sachet into the water and stir the solution until fully dissolved.
Step 2: Start applying at the highest point to control excessive run off that could damage grass and plants. Apply evenly to soak the surface area.
Step 3: Leave to dry. Rinse out the watering can and any other equipment with cold water.
Surfaces in poor condition
Follow these additional steps for areas with excessive surface algae or weeds / moss between joints.
Step 1: Apply first application of Multi-Pave. Leave to work for a minimum of two weeks.
Step 2: Spot treat any remaining weed growth with weed killing product.
Step 3: Apply second treatment of Multi-Pave 4 weeks after the first. Multi-Pave will gradually break up the moss and debris between the joints and slowly disperse over time.
Results: Be patient
Allow rainfall to rinse your block paving and Block Blitz Multi-Pave will gradually start to transform your paving. Multi-Pave has a slow, secondary, cleaning effect which helps prevent the regrowth of algae and moss for months afterwards. It will also help clean jointing materials, helping to deter future weed growth. Any newly emerging weeds can be spot treated with a weed killing product. However, the more you use Multi-Pave, the more resistant the joints will become to weed growth.
NB: Multi-Pave Outdoor Cleaner will not restore the colour of weathered surfaces.
Safety first
IMPORTANT: When using Multi-Pave cleaner;
Always wear suitable gloves, eye protection, clothing and footwear.
Keep out of the reach of children
Keep children and pets off treated areas until dry
Never add water to Multi-Pave. Always add Multi-Pave to water. If you get any powder on your skin, wash off immediately with water.
Warning: May be corrosive to metals. Causes severe skin burns and eye damage. Wash hands thoroughly after handling. Wear skin and eye protection. IF SWALLOWED: Rinse mouth. DO NOT INDUCE VOMITING. IF ON SKIN (or hair): Rinse cautiously water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Dispose of contents in accordance with local regulations.
